The Dolby Digital Plus audio drivers being incompatible with the drivers for the computer's dedicated audio device (or vice versa) is what causes Dolby audio applications to stop working after a Windows 10 upgrade in most cases. Thankfully for anyone and everyone affected by this issue, it is entirely fixable. Check in Device Manager if you have the Realtek driver. Per this thread the Dolby driver is in DAX2 folder of the Realtek driver. If not, here is the download page. I cannot find how to re-install Dolby audio driver on my Lenovo AIO 540 following upgrade to WINDOWS 10 This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. Looking for audio drivers for Dolby Home Theater® v4, Dolby Advanced Audio™ v2, Windows® 8, or Windows 10? You can find them by visiting the support section of your PC or tablet manufacturer's website. Every manufacturer's computer or tablet model is custom-tuned to deliver an optimized audio experience for the device.
- Dolby Digital Sound Driver For Windows 10 Free Download
- Dolby Digital Plus Advanced Audio Driver Lenovo Windows 10
- Dolby Audio Download Windows 10
- Dolby Digital Plus Audio Driver Windows 10
The Dolby audio decoder is a Media Foundation transform (MFT) that decodes the following stream types:
- Dolby Digital, also called Dolby AC-3
- Dolby Digital Plus, also called Enhanced AC-3 (E-AC-3)
Important
For versions of Windows prior to Windows 8, the Microsoft implementation of the Dolby Digital technology is restricted under terms of the Dolby Digital licensing program to use by Microsoft applications.
For more information about these formats, refer to Advanced Television Systems Committee (ATSC) document Digital Audio Compression Standard (AC-3, E-AC-3) Revision B.
The decoder can also convert a Dolby Digital Plus stream to Dolby Digital format for AC-3 S/PIDF output, or format a Dolby Digital Plus stream for HDMI digital output.
Class Identifier
The class identifier (CLSID) of the Dolby audio decoder is CLSID_CMSDDPlusDecMFT, defined in the header file wmcodecdsp.h.
Input Types
The Dolby audio decoder supports the following input subtypes.
| Subtype | Description | Header |
|---|---|---|
| MEDIASUBTYPE_DOLBY_AC3 | Dolby Digital audio. | mfapi.h |
| MEDIASUBTYPE_DVM | Dolby Digital audio; see Audio Subtypes. This subtype can be used interchangeably with MEDIASUBTYPE_DOLBY_AC3. | wmcodecdsp.h |
| MFAudioFormat_Dolby_Digital_Plus | Dolby Digital Plus audio. | mfapi.h |
The following table lists the requires and optional attributes for the input media type.
| Attribute | Description | Remarks |
|---|---|---|
| MF_MT_MAJOR_TYPE | Major type. | Required. Must be MFMediaType_Audio. |
| MF_MT_SUBTYPE | Audio subtype. | Required. See the previous table for details. |
| MF_MT_AUDIO_SAMPLES_PER_SECOND | Sample rate, in samples per second. | Optional. Valid values are: 48000, 44100, 32000, 24000, 22050, and 16000. If this attribute is not set, the default value is 48000. [!Note] |
| MF_MT_AUDIO_NUM_CHANNELS | Number of channels, including the low frequency (LFE) channel, if present. | Optional. Valid values are in the range 1 (mono) to 8 (7.1 channel configuration). If this attribute is not set, the default value is 2 (stereo). |
| MF_MT_AUDIO_CHANNEL_MASK | Specifies the assignment of audio channels to speaker positions. | Optional. If specified, the value must be consistent with the number of audio channels. If the attribute is not set, the decoder uses a default channel mask, based on the number of channels. |
The following table lists the supported Dolby channel configurations.
| Channel configuration | Number of channels | Channel masks |
|---|---|---|
| 1/0 (mono) | 1 | 0x4 (SPEAKER_FRONT_CENTER) |
| 2/0 (stereo) or 1+1 (dual mono) | 2 | 0x3 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT) |
| 3/0 | 3 | 0x7 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER) |
| 2/1 | 3 | 0x103 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_BACK_CENTER) |
| 3/1 | 4 | 0x107 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_BACK_CENTER) |
| 2/2 | 4 | 0x33 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_BACK_LEFT | SPEAKER_BACK_RIGHT) or 0x603 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_SIDE_LEFT | SPEAKER_SIDE_RIGHT) |
| 3/2 | 5 | 0x37 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_BACK_LEFT | SPEAKER_BACK_RIGHT) or 0x607 (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_SIDE_LEFT | SPEAKER_SIDE_RIGHT) |
| 3/2 + LFE | 6 | 0x3F (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_LOW_FREQUENCY | SPEAKER_BACK_LEFT | SPEAKER_BACK_RIGHT) or 0x60F (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_LOW_FREQUENCY | SPEAKER_SIDE_LEFT | SPEAKER_SIDE_RIGHT) |
3/2/2 + LFE[!Note] | 8 | 0x63F (SPEAKER_FRONT_LEFT | SPEAKER_FRONT_RIGHT | SPEAKER_FRONT_CENTER | SPEAKER_LOW_FREQUENCY | SPEAKER_BACK_LEFT | SPEAKER_BACK_RIGHT | SPEAKER_SIDE_LEFT | SPEAKER_SIDE_RIGHT) |
In addition, channel configurations 1/0, 2/0, 3/0, 2/1, 3/1, and 2/2 may also appear with an LFE channel.
Output Types
The Dolby audio decoder supports the following output subtypes.
| Subtype | Description | Header |
|---|---|---|
| MFAudioFormat_Dolby_AC3_SPDIF | Dolby AC-3 audio formatted for S/PDIF digital output. | mfapi.h |
| KSDATAFORMAT_SUBTYPE_IEC61937_DOLBY_DIGITAL_PLUS | Dolby Digital Plus audio formatted for HDMI digital output. | ksmedia.h |
| MFAudioFormat_Float | IEEE 32-bit floating-point PCM audio Windows 10: stereo, 5.1, 7.1 Previous versions: stereo, 5.1 | mfapi.h |
| MFAudioFormat_PCM | 16-bit PCM audio Windows 10: stereo, 5.1, 7.1 Previous versions: stereo, 5.1 | mfapi.h |
The following table lists the required and optional attributes for the output media type.
Dolby Digital Sound Driver For Windows 10 Free Download
| Attribute | Description | Remarks |
|---|---|---|
| MF_MT_MAJOR_TYPE | Major type. | Required. Must be MFMediaType_Audio. |
| MF_MT_SUBTYPE | Audio subtype. | Required. See the previous table for details. |
| MF_MT_AUDIO_SAMPLES_PER_SECOND | Sample rate, in samples per second. | Required. Valid values are: 48000, 44100, 32000, 24000, 22050, and 16000. The output sample rate must be identical to the input sample rate. The decoder cannot change the sampling rate of the stream. |
| MF_MT_AUDIO_NUM_CHANNELS | Number of channels, including the low frequency (LFE) channel, if present. | Required for PCM output. Not needed for digital output. If the input type is mono, stereo, or dual-mono (all without LFE channel), the only valid value is 2, for stereo output. Otherwise, the value can be:
|
| MF_MT_AUDIO_CHANNEL_MASK | Specifies the assignment of audio channels to speaker positions. | Required for PCM output if the number of channels is greater than 2. The value must be:
|
| MF_MT_AUDIO_BITS_PER_SAMPLE | Number of bits per audio sample. | Required for PCM output. The value must be 32 for MFAudioFormat_Float, and 16 for MFAudioFormat_PCM. Not needed for digital output. |
| MF_MT_AUDIO_VALID_BITS_PER_SAMPLE | Number of valid bits of audio data in each audio sample. | Optional for PCM output. If set, the value must be identical to MF_MT_AUDIO_BITS_PER_SAMPLE. Not needed for the digital output subtypes. |
| MF_MT_AUDIO_BLOCK_ALIGNMENT | Block alignment, in bytes. | Optional for PCM output. Not needed for digital output. |
| MF_MT_AUDIO_AVG_BYTES_PER_SECOND | Average number of bytes per second. | Optional for PCM output. Not needed for digital output. |
Transform Attributes
The Dolby audio decoder implements the IMFTransform::GetAttributes method. The application can use this method to get or set the following attributes.
| Attribute | Description |
|---|---|
| CODECAPI_AVDecAudioDualMono | Specifies whether a 2-channel Dolby audio stream is encoded as stereo or dual-mono. Before the first Dolby frame is decoded, the value is eAVDecAudioDualMono_UnSpecified. After decoding begins, the value reflects the most recent Dolby frame. Read-only. |
| CODECAPI_AVDecAudioDualMonoReproMode | Specifies how the decoder reproduces dual-mono audio. The default value is eAVDecAudioDualMonoReproMode_LEFT_MONO. The application can set this property at any time. Read/write. |
| CODECAPI_AVDecCommonMeanBitRate | For Dolby Digital (AC-3) streams, specifies the bit rate of the input stream in bits per second. For Dolby Digital Plus (E-AC3), the value is always zero. Read only. |
| CODECAPI_AVDecDDDynamicRangeScaleHigh | The high-level cut when the decoder performs dynamic range control. Read/write. |
| CODECAPI_AVDecDDDynamicRangeScaleLow | The low-level boost when the decoder performs dynamic range control. Read/write. |
| CODECAPI_AVDecDDOperationalMode | The compression control mode. Read/write. |
| CODECAPI_AVDecDDStereoDownMixMode | The type of stereo downmix. This property applies when the input is a multichannel stream and the output is a stereo stream. Read/write. |
| MFT_SUPPORT_DYNAMIC_FORMAT_CHANGE | This attribute returns FALSE, indicating that the decoder must be drained before a new input type is set. Read/write. |
Dolby Digital Plus Advanced Audio Driver Lenovo Windows 10
Remarks
Fallout new vegas 5.56 ammo. The decoder accepts only raw Dolby streams, as defined by A/52B. Payloads such as Packetized Elementary Streams (PES) are not supported. For Dolby Digital Plus, the decoder decodes up to 5.1 channels. On Windows 10, 7.1 channel streams are decoded without downmix. On previous OS versions, if the stream is 7.1 channels, only the 5.1 channel downmix will be decoded. If the stream is Dolby Digital Plus with more than one independent substream, only independent substream 0 is decoded. The decoder skips other independent substreams. In addition, the decoder skips all dependent substreams. The decoder supports decryption and decoding of streams that are protected by Digital Rights Management (DRM) technology.
If the input media type has a channel configuration other than mono, stereo, or dual-mono (all without LFE channel), the decoder provides two options for the output channel configurations:
- 8-channel output (7.1 channel configuration)
- 6-channel output (5.1 channel configuration)
- Stereo downmix
Dolby Audio Download Windows 10
If stereo downmix is selected, the type of downmix can be set on the MFT by using the CODECAPI_AVDecDDStereoDownMixMode property.
If the output type is MFAudioFormat_Dolby_AC3_SPDIF, each output buffer contains 6,144 bytes. The buffer starts with an 8-byte S/PDIF header, followed by a compressed AC-3 frame, followed by zero padding to 6,144 bytes.
If the output type is KSDATAFORMAT_SUBTYPE_IEC61937_DOLBY_DIGITAL_PLUS, each output buffer contains 24,576 bytes. The buffer starts with an 8-byte S/PDIF header, followed by 1–6 compressed Dolby Digital Plus frames corresponding to 1,536 PCM samples, followed by zero padding to 24,576 bytes. For HDMI output, only independent substream 0 is packed.
Dolby Digital Plus Audio Driver Windows 10
The decoder MFT is registered with the flag MFT_ENUM_FLAG_FIELDOFUSE, which indicates that the MFT that must be unlocked by the application before use. For more information, see Field of Use Restrictions.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 [desktop apps | UWP apps] |
| Minimum supported server | None supported |
| DLL |
|
See also
